B&B Grinding Services | Huddersfield

sales@bandbgrindingservices.co.uk

About Us

Hard Part Turning: Soft State Prep

Here's our advice on preparing your components in their soft state in order to get the best possible results in Hard Part Turning.

Right Parts for HPT?

To begin, it's always important to make sure your parts are actually suited to Hard Part Turning. We've found that size and geometry do play a big role in the outcome of a finish and would advise that parts need to have a small length-to-diameter (L/D) ratio of no more than 4:1.

Consistency of Material

Reducing the stress on your tools is key, so while your materials are in their soft state it's key to ensure that the sizing and consistency will match throughout. Although there is a range of material that can be turned, one made of 59HRc will certainly machine differently to one at 62HRc. B&B would advise that even where variation is allowed, you should avoid it in order to boost effectiveness. It's also important during soft stage to chamfer holes, keyways and slots.

Preparation

As with any machining, consistency is one of the key factors that we look to achieve. With Hard Part Turning it's important during the soft state prep to first perform soft machining. This will minimize surface imperfections, allow for a completely dry HPT and also stabilise hardening effects.

Aim

The key things to aim for during the soft state prep for Hard Part Turning are to avoid burrs, don't enter or leave your cut abruptly, and try to ensure you keep close dimensional tolerances.

Of course, if all of this sounds like too much trouble you could always sub-contract your Hard Part Turning to B&B Precision. We have dedicated machines manned by our team of friendly experts and remain massively cost effective against buying a new machine yourself. We can handle every step of production from sourcing the material, to prepping it for HPT right down to delivering it to your front door.
 

Enquire about our services...